Safety Information - Britax B-SAFE GEN2 Guide D'utilisation

Masquer les pouces Voir aussi pour B-SAFE GEN2:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

BRITAX Child Safety, Ltd.

Safety Information

Failure to follow all warnings and instructions on the restraint
system could result in SERIOUS INJURY or DEATH.
Read all instructions before use of the infant carrier.
• The restraint system must be in a rear-facing position when it
is used for an infant.
• Only use carry handle position 1 when using in a vehicle. See
page 33.
• Use only with children who weigh between 1.8 and 15.8 kg (4
and 35 pounds) and whose height is 81.3 cm (32 inches) or
less.
• Do not use outer harness loops or outer buckle slot for a
child weighing less than 5 kg (11 lbs). See page 30.
• Snugly adjust the belts provided with this child restraint
around your child.
• This child restraint must be secured to the vehicle with a
lower connector system, if the restraint system is installed
in a seating position that is equipped with a Lower Universal
Anchorage System (LUAS), or a vehicle seat belt if the
restraint system is installed in a seating position that is not
equipped with a LUAS.
• This child restraint system must be used only in a forward-
facing seating position equipped with a vehicle seat belt or a
lower universal anchorage system.
• Follow all instructions on this child restraint and in the written
instructions located in the base storage compartment. Keep
the instructions with the restraint for future use.
• Register your child restraint with the manufacturer.
• This child seat can only be used in the following classes of
vehicles: multi-purpose passenger vehicles, passenger cars,
or trucks.
• This infant car seat must not be used in shopping carts,
boats, or other non-certified applications.
4

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

B-safe gen2 flexfitB-safe gen2 flexfit plus

Table des Matières