Booster Seat Without Backrest; Checklist - Britax SKYLINE Guide De L'utilisateur

Britax Child Safety, Inc.

Booster Seat without Backrest

1� Ensure the booster seat is positioned in a location that has a
vehicle head restraint, and attach lower connectors as shown in
Positioning the Booster Seat on page 18�
2� Seat your child in the booster seat�
3� Pull the vehicle seat belt out, then route the lap part of the vehicle
seat belt under both armrests and over the left and right base
belt guides�
NOTE: The shoulder part of the vehicle seat belt should be routed
under the armrest on the buckle side.
4� Verify that the vehicle seat belt is not twisted and then fasten
across the child�
NOTE: The lap part of the vehicle seat belt should rest low on
the child's upper thighs and be routed under the armrests. The
shoulder belt should lie across the center of the child's chest and
be positioned at or above the child's shoulder.
22
5� Remove slack from the vehicle seat belt�
• Vehicle seat belt is not twisted�
• Vehicle seat belt is securely positioned and fastened�
• Lap part of the vehicle belt rests low on child's upper thighs and be routed under the
armrests�
• Shoulder belt lies across the center of the child's chest and is positioned at or above the
child's shoulder�
SKYLINE User Guide

CHECKLIST

23