Britax B-SAFE GEN2 Guide D'utilisation page 27

5. Push the infant car seat
firmly into the vehicle seat
while removing all slack
from the vehicle belt.
Carrier Only Installation with Lap Belt
ü Check that the vehicle belt is tight, not twisted, and
that the infant car seat is secure. The infant car seat
is secure when it moves less than 2.5 cm (1 inch)
front-to-back or side-to-side at the vehicle belt path.
ü Check that the recline angle is correct. The proper
recline angle is achieved when the level line on the
shell is level to the ground.
ü Check that the infant car seat handle is rotated and
locked into position 1. See page 33.
B-SAFE GEN2 User Guide
CHECKLIST
25