Britax B-SAFE GEN2 Guide D'utilisation page 13

2. Move the base up
or down until the red
marker is visible on the
recline angle indicators
while on the vehicle seat.
If there is a problem achieving the proper recline angle after
installing, try another approved seating position in your
vehicle or:
a. Uninstall the base and lower the recline angle
adjustment foot to the lowest position.
b� Remove the base from
the vehicle and place
a rolled towel or pool
noodle in the vehicle
seat bight�
c� Place the base against
the towel or pool
noodle to level the shell and install.
NOTE: If a towel or pool noodle is needed for the
recline angle, the recline angle adjustment foot on the
base should remain in its lowest position.
IMPORTANT:
car seat and the car seat is attached to the base,
ensure that the red marker is visible on the recline angle
indicator.
After the child is secured in the infant
B-SAFE GEN2 User Guide
ü
û
ü
û
11