Lap-Shoulder Belt Installation - Britax B-SAFE GEN2 Guide D'utilisation

Masquer les pouces Voir aussi pour B-SAFE GEN2:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

BRITAX Child Safety, Ltd.

Lap-Shoulder Belt Installation

IMPORTANT:
determine how to lock your vehicle belt system.
* If you cannot lock your vehicle seat belt you must
use a locking clip. Locking clips are available from
BRITAX at 1-888-427-4829 or 1-704-409-1699.
1. Secure your child in the
infant car seat before
installing the car seat in
the vehicle.
2. Place the infant car seat
rear facing on the vehicle
seat.
3. Pull the vehicle belt
out and only route the
lap portion through the
carrier only belt guides.
4. Verify that the vehicle
belt is not twisted
and buckle.Lock your
vehicle seat belt system
as instructed by your
vehicle owner's manual.
22
Check your vehicle owner's manual to

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

B-safe gen2 flexfitB-safe gen2 flexfit plus

Table des Matières