5. Feed excess webbing back
into base and ensure that
lower connector straps are
flush with the base.
ü Check that the lower connector strap is tight and
ü Check that the recline angle is correct and confirm
B Safe Can MPP user guide.indb 13
Base Installation with LUAS
CHECKLIST
that the base is secure. The base is secure when
it moves less than 2.5 cm (1 inch) front-to-back or
side-to-side at the vehicle belt path.
that the red marker is visible between the two lines
on the recline angle indicators.
B-SAFE 35 User Guide
13
1/30/2015 5:11:53 PM