Dräger Aerotest HP Notice D'utilisation page 43

en
Technical data
Adapter 2 Inlet
Outlet
Part number
Max. operating
pressure
Ambient conditions
Measuring Length x width
device
Height including tube
holder
Connection for
compressed air supply
3)
Inlet pressure
Volume CO and CO tubes
2
flow
Impactor, oil tube and
H O tube
2
Oil tube of PN
Nitrous gases tube, H
and SO tube
2
O tube
2
1) Only applies without an adapter. The specifications regarding the supplied adapters must be observed.
2) Corresponds to the inlet pressure of the measuring device.
3) Corresponds to the outlet pressure of the first-stage regulator. The measuring device must only be used in combination with the supplied first-stage regulator. Will be set at the time of
delivery.
42
Aerotest HP
Internal thread G5/8
.825"-14NGO-RH-EXT
Internal thread G5/8
U 06 533
300 bar
100 x 38 mm
0.2 L/min
4 L/min
---
S ---
2
---
Aerotest HP USA Aerotest HP NF
External thread
Internal thread G5/8
65 25 957
300 bar
+15 °C up to +25 °C, 1013 mbar
100 x 38 mm 100 x 38 mm
230 mm
Plug nipple 9 mm
8.5 bar
0.2 L/min
4 L/min
---
---
---
Aerotest NOx
--- Internal thread G5/8
--- Internal thread G5/8
--- U 06 533
--- 300 bar
120 x 38 mm
0.2 L/min 0.2 L/min
4 L/min 4 L/min
--- ---
--- 0.2 L/min
--- ---