Publicité
Les langues disponibles
Les langues disponibles
Manual PTB 24 ATEX 1001 X
Temperature monitoring system with tem-
perature controllers and safety temperature
limiters type TMS
Target group
Experienced electricians as defined by the Oper-
ating Safety Ordinance and properly instructed
personnel.
Contents
1.
Safety instructions
2.
Conformity with standards
3.
Technical data
4.
Requirements to be met by safety
temperature controllers
5.
Installation
6.
Initial start-up
7.
Inspection, Maintenance and Repair
8.
Disposal
1.
Safety instructions
System of temperature controllers and safety
temperature limiters are not suitable for use in
Zones 0 and 20.
During operation, do not leave this Instruction
Manual or other objects inside the enclosure of
the temperature controller or safety temperature
limiter.
Use the temperature controller or safety temper-
ature limiter only for its intended purpose and
only in clean, undamaged condition and only for
duties where it is certain that the materials of the
enclosure, sensor and capillary tube are compat-
ible with the environment.
In the event of incorrect assembly, the require-
ments of IP 66 as specified by IEC 60529 are no
longer met.
Do not make any modifications to the tempera-
ture controller or safety limiter that are not
expressly mentioned in this Instruction Manual.
Edition April 2024
Copyright
thuba Ltd., CH-4002 Basel
Switzerland
3
Publicité
