Bosch ACS 663 Notice Originale page 47

3. Introduction
3.1 Application
The station is suitable for vehicles with traditional
combustion engine (PAG oil), hybrid and electric (POE
oil).The station has all the functions necessary for the
maintenance of vehicle air conditioning systems.
!
The station can operate with PAG oil or POE oil. The
mixture of the two oils causes damage to the vehicle
air conditioning system. The station is delivered with
a new oil bottle for PAG compressor oil and one for
POE oil compressor. Fill both new oil bottles with
the correct compressor oil and always be careful to
connect the correct new oil bottle.
!
The station can only be used with R1234yf. The
station must not be used for the maintenance
of vehicles with air conditioning systems that
use refrigerants other than R1234yf to prevent
damage. Before performing maintenance of the air
conditioning system, check the type of refrigerant
used in the air conditioning system of the vehicle.
3.2 Supply
Replacement component
ACS 663
Safety kit (glasses and gloves)
Original instructions
1)
High pressure service hose
Low pressure service hose 1)
1 x New oil bottle PAG 250ml
1 x New oil bottle POE 250ml
1 x UV dye bottle 250ml
Oil drain bottle 250ml
Tank adapter (1234 <22 HW)
Tank adapter gaskets (1234 <22 HW)
Tank adapter (1234 DNT)
Tank adapter gaskets (1234 DNT)
Power cable
1) Preassembled
Robert Bosch GmbH
3.3
12
11
10
9
8
Code
–
Fig. 1:
SP00100744
1 Low pressure (LP) gauge
2 Printer (optional, standard on P variants)
SP00D00616
3 High pressure (HP) gauge
–
4 Refrigerant identifier filter (optional, standard on RI variants)
–
5 Main switch
SP00101914
6 Power socket
SP00101913 7 Resettable fuse
8 UV dye bottle
SP00101915
9 New oil bottle (POE)
SP00101727
10 New oil bottle (PAG)
SP00100699
11 Exhausted oil bottle
SP00100366
12 Control panel and display
SP00100698
SP01100020
SP00100438
Introduction | ACS 663 | 47
Description of the equipment
1 2
ACS 663
SP00D00616
en
3
4
5
6
7
|
2019-11-08