Publicité
Les langues disponibles
Les langues disponibles
7 - C
OMMISSIONING YOUR WINE CABINET
V- Humidity level display
Your wine cabinet is equipped with a hygrometry function (1-temperature models set between 9°C
and 15°C / 48° and 59°F)*, enabling you to see the relative humidity level inside the cabinet.
The ideal hygrometry rate is over 50%.
*
• Press on the button
for 2 seconds
The relative humidity is displayed (from 50% to 90%).
After 15 seconds the display will automatically return to cabinet temperature.
Should you wish to increase the level of relative humidity inside your cabinet, pour the equivalent of one glass of water on the clay humidity cassette in the
receptacle located at the bottom right hand side of your cabinet (see diagram on next page "Relative humidity level alarm").
*The multiple temperature models do not have the hygrometry function.
VI- Lighting mode adjustment
Your wine cabinet has mood lighting that also enables you to read your wine labels more easily.
Unlike standard lighting, EuroCave lighting does not produce ultraviolet rays, and only gives off a miniscule amount of heat.
Thus, your wines are preserved in total safety.
Electrical consumption less than 7 watts / hour in constant use.
Usage precautions:
Intense light, never look directly into the beam.
There are 3 possible lighting settings:
- lighting disabled,
- lighting when door opens (it goes out when the door is closed),
- lighting all the time (for mood lighting when using a glass door cabinet, for example).
*
• Press on the button
for 2 seconds, the lighting mode is then displayed.
*
• Press on the button
to select your lighting mode (3 options):
Lighting is in
constant
mode
Example of a display for 1-temperature model
*
• Press on the button
to confirm your choice and move on to the next step (setting display lighting)
Note: When "Ecl" is displayed, you have 15 seconds to select and confirm the required lighting mode, otherwise the display automatically returns to cabinet
temperature.
VII- Adjusting the display lighting
You can increase or reduce your cabinet's display lighting:
Once you have confirmed the lighting mode, "bL n" appears:
• Press on the buttons
or
• A figure of 0 to 3 is displayed after the "bL" (0=no lighting - 3=stronger lighting).
*
• Press on the button
button to confirm your choice and move on to the next step (display of the carbon
filter log).
Note: When "bL n" is displayed, you have 15 seconds to select and confirm the required lighting mode, otherwise the display automatically returns to
cabinet temperature.
VIII- Carbon filter counter log display
Your wine cabinet has a counter that displays the countdown in days that the carbon filter has been in use (change once a year, see alarms and current
maintenance chapters, page 20).
After setting the display lighting, the counter is displayed, as in the following example:
The display indicates that you have 28 days before the next filter change .
• After 15 seconds the display will automatically return to cabinet temperature, or press on the
* For multi-temperature models, the buttons are located to the right of the casing.
*
to increase or reduce your cabinet's display lighting.
Lighting is in
intermittent mode:
comes on when door
is opened
*
button.
No lighting
18
EN
Publicité
