Publicité
Les langues disponibles
Les langues disponibles
7 - C
OMMISSIONING YOUR WINE CABINET
IV - Temperature settings
Your wine cabinet's temperature is adjusted at the control panel which contains the following features:
Cabinet
Hot circuit operating
temperature
indicator light (red)
display
Cold circuit operating
Infra-red "door open"
indicator light (blue)
detection sensors
To adjust the temperature of your 1-temperature cabinet:
• Press the
button and release it
immediately
The current set temperature is displayed
(the displayed figure flashes).
• When the displayed figure flashes you have
5 seconds to change the temperature setting
by pressing the
or
as appropriate, otherwise the display
automatically returns to the previous setting.
Recommended maturing setting range: 10 to 14°C (50° to 57°F)
• Press the
set button to confirm the new setting and the display will show the new setting.
The default setting is 12°C / 54°F (ideal maturing temperature). However, this setting can be adjusted between
5 and 20°C* (41° and 68°F*).
Beyond these limits, the buttons
*Converting your maturing cabinet into a service cabinet
You can use your 1-temperature maturing cabinet as a service cabinet in order to bring your white and red wine to tasting temperature
(setting range between 5° to 20°C / 41° to 68°F).
- White wines: recommended setting between 6° to 10°C (43° to 50°F),
- Red wines: recommended setting between 15° to 18°C (59° to 64°F).
This cabinet can therefore be used as a specific white or red wine service cabinet.
WARNING: to operate correctly your cabinet should be located in a room with a temperature between
0° and 35°C (32° and 95°F).
When making substantial changes to the temperatures it may take several hours to stabilise and display the required temperature.
The performance of wine cabinets is optimized when they are loaded to at least 75% of their maximum
capacity.
a- 1-temperature models (V059 - V159 - V259)
Cabinet
temperature setting
buttons
Temperature
zone
concerned
button
and
are disabled.
Selection and
confirmation
button
• Temperature display: displays the actual temperature inside
your wine cabinet
• Adjustment buttons: enables the required temperature
inside the cabinet to be selected
• Indicator lights: display the operational status of the hot
(red) and cold (blue) circuits
Standby status
button
16
EN
Publicité
