IV- Carbon filter
We recommend that you change the carbon filter in your cabinet every year (see current maintenance chapter).
When the filter has reached a lifespan of one year, the icon
Once the carbon filter has been changed, go to the "carbon filter counter log" menu (Press on the
screen , then press the
counter by pressing on the button
* For the 2-temperature, 3-temperature and multi-temperature models the buttons are located to the right of the casing.
** Press the
* button to return to the temperature display. Wait 15 seconds (do not touch any of the controls during this time).
Your EuroCave wine cabinet is a tried and tested, easy-to-use appliance.
The few following maintenance steps will enable you to achieve a very
long appliance lifetime.
Clean the aeration filter at least every 3 months, (see diagram opposite):
- Remove the 2 screws (1) from the grille with a no. 2 hexagonal spanner
(provided int the accessories bag),
- Remove the grille (2), take out the filter (3) and place under running
water,
- Leave to dry and refit the assembly.
- Each year, replace the active carbon filter housed in the upper ventilation
hole in your cabinet.
Remove the carbon filter manually to lever it out (see diagram opposite).
The carbon filter is available from your usual dealer. It must be replaced
using a manufacturer guaranteed part.
A visual alarm will warn you when you need to change the carbon filter
(see previous chapter).
- When cleaning your cabinet, and before moving it, make sure that you have unplugged it and removed all the
bottles from the cabinet.
- Carry out a complete cleaning of the inside of the cabinet once a year, after having
unplugged and unloaded it (use water and a gentle cleaning product, then rinse carefully).
Monitor your appliance regularly and report anything that might appear abnormal
to your dealer, in this way you can guarantee the long life of your cabinet.
* key once. The LU or BLN mode appears then for a second time on
. The icon
will then go out.
9 - S
TANDARD MAINTENANCE
8 - A
will flash.
LARMS
* key until the lighting menu appears on the ECL
*, the filter menu appears.) and reset the
1- Filter screw
2- Filter grille
3- Filter
20
EN