Eurocave Compact 59 Serie Mode D'emploi page 30

5 - I
c - Reversibility of the door
The door of the wine cabinet is reversible so you can change the direction
of opening.
To do this, proceed as follows (for example, to change a right hand door
into a left hand door):
• To remove the door
- Close the door,
- Carefully remove the plugs (2) and (5) with a thin blade (Fig. a),
- Unscrew the screws (3) with a tool Torx TX25 while holding the door to
prevent it falling (Fig. a),
- Remove the upper hinge (1) (Fig. a).
Fig. a
- Lift the door off the cabinet by opening it slightly, then lifting it up (Fig. b).
Fig. b
- Remove the washer (9), remove the pin (7) with a no. 10 hexagonal
spanner (Fig. c).
- Carefully remove the plug (10) with a thin blade and in its place fit the
pin (7) and washer (9) (Fig. c).
- Replace the plug (10) on the opposite side (Fig. c).
Fig. c
11
NSTALLING YOUR WINE CABINET
- Unscrew the 4 screws (15) (Fig. d)
- Attach the lug (11) to the opposite side of the cabinet, using the screws
(15) (Fig. d).
Fig. d
• To turn the logo round (solid doors only)
- Unscrew the screw (17) with a tool Torx T20 screwdriver (Fig. e)
- Remove the cam (13) (Fig. e).
- Unscrew the nut (16) with a no. 28 spanner (a) (provided in the
accessories bag) (Fig. e).
Fig. e
- Remove the lock (12) while holding the logo support (14) (Fig.f).
Fig. f
- Taking care, transfer (to the lock side) the logo support (14) (Fig. g).
Fig. g