Publicité
7 - C
IV - Temperature setting
Your EuroCave S058 is a multi-temperature cabinet
Your wine cabinet's temperature is adjusted on the control panel.
Temperature display
To adjust your cabinet temperatures
• Press the Set 1 button for the upper zone or Set 2 for the lower zone, the symbol
• Press the Probe button to make the previous setting appear.
• Set the desired temperature using the Set 1 and Set 2 buttons.
• Confirm your programming by pressing the Probe button.
To adjust the temperature setting of the cabinet's second zone, repeat the process.
Temperatures can vary from 7°C (45°F) to 21°C (70°F).
The recommended temperature range for the lower part is 7°C (45°F) to 21°C (70°F), for the upper part it is 15°C (59°F) to 21°C (70°F). The two set
temperatures (upper and lower area) must be higher than 3°C (37°F). The set temperature for the lower part should never be higher than the set
temperature for the upper part.
To operate correctly, your cabinet should be located in a room with a temperature
between 12 and 35°C (54°F to 95°F).
When making significant changes to the temperature it may take several hours to stabilise and display the required temperature.
OMMISSIONING YOUR WINE CABINET
Confirmation button
(probe)
Temperature control (Set 1 / Set 2)
• Temperature display: displays the current temperature inside
your wine cabinet.
• Temperature control buttons (Set 1 / Set 2): set the desired
temperature inside the cabinet.
• Temperature control button (probe): confirms the
temperature setting.
appears.
13
EN
Publicité
