Publicité
5 - I
III - Installation
BUILT - IN
• Dimensions to be observed for a solid or glass door (Fig.1):
Make a ventilation hole in the worktop for air circulation
A max.
A min.
058
837
821
Fig. 1
• Dimensions to be observed for an optional technical door(Fig.2):
Make a ventilation hole in the worktop for air circulation
A max.
058
852
Weight of
door face:
15kg max.
Fig. 2
CHANGING THE HINGES
- Remove the grommets (2) and screws (3) using a T25 Torx spanner and
take off the hinge (1) (Fig.3).
Fig. 3
NSTALLING YOUR WINE CABINET
B
C min.
Glass door
570
820
Air
A min.
B min.
836
841
Air
- Fit the hinge and pivot (4) using the screws (3) so that the door is parallel
to the cabinet body (Fig.4).
Fig. 4
Precautions: On closing the door, check that the door seal engages
firmly with the cabinet to ensure optimal sealing.
- Remove the grommets (5) (Fig. 5).
Fig. 5
- Fit the hinge without a pivot (6) using the screws (3) (Fig. 6).
Fig. 6
- Tilt the cabinet forwards. Make sure the door is locked to prevent it from
opening.
- Unscrew the back feet and fit the extenders, using a 17 mm spanner or an
adjustable spanner.
- Screw the 2 rear feet back on under the extenders.
Extender
Foot
Fig. 7
9
EN
Publicité
