Establish Connection; Menu Tree - Sartorius Biowelder Total Containment Mode D'emploi

6.3.1

Establish connection

The current IP address is requested from the touch screen in the Info menu
and it must be entered in the URL box of the browser as shown in the
diagram below. See also Chapter 6.2.11 Info
Example: The IP address of the device is 192.168.1.104. Input in the URL box:
"192.168.1.104" followed by the Enter key. The homepage of the device then
appears as follows:
Depending on the browser used, shortcuts or buttons can be set up to
operate several Biowelder
If the device is initialised with the Web browser at the time of welding,
the Initialise Axes menu item is greyed out . If not, the Weld and Validation
menu items are greyed out .
6.3.2

Menu tree

Menu
Operating Manual Biowelder
TC devices efficiently from one browser.
®
Meaning
User login or logout,
see Chapter 6.3.6 User login/logout
Initialise axes,
see Chapter 7.1 Initialise axes
Weld, see Chapter 7.2 Weld
Validation, see Chapter 7.4
Temperature Validation
General settings,
see Chapter 6.2.9 User management
User management,
see Chapter 6.3.8 User management
Info, see Chapter 6.3.10 Info
Total Containment
®
Operation
27