User Management - Sartorius Biowelder Total Containment Mode D'emploi

Operation
Parameter
24 Operating Manual Biowelder
6.2.9

User management

User management contains all users. A user can edit their user data or data
from the same or a deeper user group. The Operator can only change their
own password.
User management is divided into three different screens on the touch
screen. For the input, please read Chapter 6.2.2 Operator controls. You can
find the different screens and their parameters in the following table.
Meaning
Screen 1:
Screen change with the down arrow
All users are offered for selection which the logged in user can change.
The user can select a user for deletion or add a new user to the spinner
with Input. Users cannot delete themselves.
Every user must belong to a user group. The user group defines the rights.
The current user cannot change his or her user group. Chapter 9.5 User
groups and user interfaces displays all users and their rights.
A password must be assigned. The password must be entered once.
Screen 2:
Screen change with the down arrow
All users are offered for selection which the logged in user can delete.
Users can not delete themselves.
Screen 3:
Screen change with the down arrow
Automatic Login can be assigned exclusively to one single user. When
switching on the device and when changing the user interface, the login
dialogue in this case is skipped and the user with Automatic Login is
logged in. A user loses Automatic Login if Automatic Login has been
assigned to another user.
Total Containment
®