Publicité
Les langues disponibles
Les langues disponibles
Starting the engine
Warning
Before starting the engine, become familiar with the
controls you will need to use when riding (page 10).
1) Turn the ignition key ON (fig. 34). Make sure both the
green light N (6, fig. 6) and the red light
on the instrument panel come on.
Important
The oil pressure light should go out a few seconds
after the engine has started (page 14).
Notes
It is possible to start the engine with the side stand
down and the gearbox in neutral. When starting the bike
with a gear engaged, pull the clutch lever (in this case
the side stand must be up).
(5, fig. 6)
ON
E
fig. 34
43
Publicité
