Ducati MULTISTRADA 620 Manuel D'utilisation Et Entretien page 122

RH switch (fig. 20)
1) Switch for ENGINE STOP, two positions:
- position (RUN) = run;
- position (OFF) = stop engine.
Warning
This switch is mainly intended for use in emergency
cases when you need to stop the engine quickly. After
stopping the engine, return the switch to the
to enable starting.
2) Button = engine start.
3) Button = hazard warning flashers
Press to switch on the hazard warning indicators.
Press again to switch the hazard warning indicators off.
Throttle twistgrip (fig. 20)
The twistgrip (3) on the right handlebar opens the throttles.
When released, it will spring back to the initial position
(idling speed).
position
1
4
2 3
E
fig. 20
29