Publicité
Les langues disponibles
Les langues disponibles
Troubleshooting (continued)
•
COOKTOP
Baking Issues
Heating elements and controls
do not work.
Heating elements do not heat
properly.
Heating elements cycle off
even when elements are turned
to their highest settings.
Glass ceramic surface is see
through or appears to be red in
color.
Possible Causes
Fuse is blown or circuit breaker is tripped.
No electricity to the cooktop.
Improper cookware is being used.
Heating element temperature limiters are
temporarily shutting off the elements due
to exceeding the maximum allowable
temperature
Under direct or bright lighting, you will
sometimes be able to see through the glass
and into the chassis due to its transparent
quality. You may also notice a red tint under
these conditions
Replace the fuse or reset the
circuit breaker. If the problem
continues, call an electrician. Have
electrician check your power supply.
Select proper cookware. See
"Cookware."
If the problem continues, call for
service.
This is a normal operating condition,
especially during rapid heat-up
operations. The element will cycle
back on automatically after it has
cooled sufficiently.
These are normal properties of black
ceramic glass panels.
21
Solutions
Publicité
