Forno Espresso FFSEL6012-30 Serie Manuel D'instructions page 19

Range Care (continued)
To place back the oven door:
1. Insert both hanger arms into the hinge receivers in the door frame.
2. Slowly open the oven door, and you will feel the door set into place.
3. Move the hinge latches back into the locked position.
Left hinge
4. Check that the door opens and closes freely. If it does not, repeat the door removal and placing the oven door back.
•
Make sure the oven and lights are cool and power to the oven has been turned off before replacing the light bulb(s).
•
The lenses must be in place when using the oven. The lenses serve to protect the light bulb from breaking.
•
The lenses are made of glass. Handle carefully to avoid breakage.
•
Failure to do so could result in death, electric shock, cuts or burns.
REPLACING AN OVEN LIGHT
The oven light is a standard 25-watt (G9) appliance bulb.
IMPORTANT: Before replacing the bulb, make sure the oven is cool and the controls are turned off.
1. Disconnect the power.
2. Remove the bulb cover by pulling it out of the opening.
3. Remove the burned-out bulb from the socket.
NOTE: To avoid damage or decreasing the life of the new bulb, do not touch the bulb with bare fingers. Wear gloves or
use a tissue when replacing the light bulb.
4. Replace the bulb, and then replace the bulb cover.
5. Reconnect the power.
Right hinge
WARNING
Electrical Shock Hazard
19