Télécharger Imprimer la page

Grundfos SE1 50 Notice D'installation Et De Fonctionnement page 10

Publicité

Les langues disponibles

Les langues disponibles

3. Receiving the product
Before installation, make sure:
The product corresponds to the order.
The pump is suitable for the supply voltage
and frequency available at the installation site.
Accessories and other equipment are not
damaged during transportation.
3.1 Transporting the product
The pump may be transported and stored in a
vertical or horizontal position.
CAUTION
Crushing hazard
Minor or moderate personal injury
Make sure the pump cannot roll or
fall over.
3.2 Handling and lifting the product
All lifting equipment must be rated for the purpose
and checked for damage before lifting the pump.
The lifting equipment rating must under no
circumstances be exceeded. The pump weight is
stated on the nameplate.
WARNING
Crushing hazard
Death or serious personal injury
Always lift the pump by its lifting
bracket or by a forklift truck if the
pump is fixed on a pallet. Never lift
the pump by the power cable,
hose, or pipe.
L
Lifting bracket
10
Pos. Description
L
Lifting bracket
For horizontal, dry-installed pumps, a special
lifting bracket can be ordered to ease the lifting of
the pump. See the service instruction on
www.grundfos.com.

Publicité

loading

Ce manuel est également adapté pour:

Se1 80Se1 100Sev 65Sev 80Sev 100