Nilfisk CA 331 Manuel D'utilisation page 46

ENGLISH
Solution tank emptying
Perform steps 1 to 4.
9. Carefully remove the solution hose (17) from the quick coupling (11).
10. Remove the solution tank (14) from the 2 mounting pins (26).
11. Empty the solution tank (14) through the plug (18) or the hole of the solution hose (17).
12. Then, rinse the tank and clean the solution fi lter (25) with clean water.
AFTER USING THE MACHINE
After working, before leaving the machine:
1. Turn the parking lever (24) to position (24b).
2. Disconnect the power supply cable (10) from the electrical mains and place it on the holder (7).
3. Empty the tanks (16 and 18) as shown in the previous paragraph.
4. Perform the daily maintenance procedures (see the Maintenance chapter).
5. Store the machine in a clean and dry place.
MACHINE LONG INACTIVITY
If the machine is not going to be used for more than 30 days, proceed as follows:
1. Perform the procedures shown in After using the machine paragraph.
2. Store the machine in a clean and dry place.
FIRST PERIOD OF USE
After the fi rst 8 hours, check the machine fastening and connecting parts for proper tightening. Check the visible parts for integrity
and leakage.
12
USER MANUAL
18
24
9097264000(1)2008-02 A
10
16
CA 331
7
24b
P100166C