Maintenance Summary Table - Grillo CLIMBER 7.13 Manuel D'utilisation

TRACTION RELEASE LEVER
The traction release device is located at the back of the machine (fig. 22); if the machine breaks
down, to allow it to be towed or moved by hand, move the lever to idle position (B, fig. 22). In the
position (A) shown in fig. 22 the machine is in working condition.
PROCEDURE
check the level
Engine oil
Air filter
check/adjust
Spark plug
Check that the engine intake grid is
clean
Check that the hydraulic engine
colling fins are clean
check the level
Hydrostatic
axle oil
Check that blades are well-
sharpened and well-fixed
● recommended procedure
‫ ٭‬procedure to be carried out if necessary
LUBRICATION POINTS
Climber Series 7/ Translation of the original instructions

MAINTENANCE SUMMARY TABLE

EVERY 8
HOURS
●
change
check ●
replace
replace
●
●
replace
●
AFTER EVERY
20 50
HOURS HOURS
●
●
●
13
EVERY EVERY 200
100 HOURS
HOURS
●
‫٭‬
●
●
●
●