44
15
To remove the second edge, bring the tool-
holder arm to the inside of the wheel, turning
the tool, and insert it between the bead and
the rim, then repeat the previous removal
operation (Fig. 19).
To fit old tyres, which have become dry, use
the tool and the mounting clamp, placing
it against the edge of the rim (Fig.20-21)
from the inside. Place the bead on the tool
and rotate the turntable anti-clockwise (see
from behind). Repeat the operation from the
outside, rotating the turntable in the same
direction (Fig. 22).
16
17
- E
- Operator's manual
nglIsh
18
19