Dreame DreameBot L10 Prime Manuel D'utilisation page 15

Routine Maintenance
Main Brush, Side Brush and Universal Wheel
1. Press the brush guard clips inwards to remove the brush guard and lift the
brush out of the robot.
2. Pull out the brush covers as shown in the diagram. Use a proper tool to
remove the hair tangled in the brush.
3. Remove and clean the side brush.
4. Use a tool such as a small screwdriver to separate the axle and tire of the
universal wheel. Do not use excessive force.
5. Rinse the universal wheel under the running water and put it back after
drying it completely.
2
1
Filter
1. Remove the filter and tap its basket gently.
Note: Do not attempt to clean the filter with a brush, finger, or any sharp
3
objects so as to avoid damaging it.
2. Rinse the dust bin and filter with water and dry them completely before
reinstalling.
Note:
·
Rinse the dust bin and filter with clean water only. Do not use any detergent.
·
Use the dust bin and filter only when they are completely dry.
EN
24h
13