Dreame DreameBot L10 Prime Manuel D'utilisation page 11

Connecting with Dreamehome App
This product works with the Dreamehome app which can be used to control
your device.
Scan the QR code on the robot, or search for "Dreamehome" in the app store to
download and install the app.
2. Add Device
Open the Dreamehome App, tap "
the QR code above again to add "DreameBot L10 Prime". Please follow the
prompts to finish the Wi-Fi connection.
QR Code
" in the upper right corner, and scan
Wi-Fi Indicator
· Blinking slowly: To be
connected
· Blinking quickly: Connecting
· On: Connected
Note:
• Only 2.4GHz Wi-Fi is supported.
• Due to upgrades in the app software, the actual operations may differ
from the directions in this manual. Please follow the instructions based on
the current app version.
3. Reset Wi-Fi
Simultaneously press and hold the
voice prompt say, "Waiting for the network configuration." Once the Wi-Fi
indicator is blinking slowly, the Wi-Fi has been successfully reset.
Note: If your robot cannot connect to the app successfully, reset the Wi-Fi and
add the device again.
and buttons until you hear a
EN
9