Dreame DreameBot L10 Prime Manuel D'utilisation page 16

Routine Maintenance
EN
Robot Sensors and Charging Contacts
Wipe sensors and charging contacts of the robot by using a soft, dry cloth:
Note: Wet cloth can damage sensitive elements within the robot and the base
station. Please use dry cloth for cleaning.
14
Laser Distance Sensor (LDS)
Edge Sensor
Bumper
Charging Contacts
Cliff Sensors
Carpet Sensor
Charging Contacts
Clean the charging contacts and the signaling area of the base station with a
soft, dry cloth.
Mop Pad
Remove the mop pad from the mop pad holder to replace it.
Battery
The robot contains a high-performance lithium-ion battery pack. Make sure
that the battery remains well-charged for daily use to maintain optimal
battery performance. If the robot is not used for an extended period of time,
turn it off and put it away. To prevent damage from over-discharging, charge
the robot at least once every three months.