Publicité
Les langues disponibles
Les langues disponibles
How to Use
Sweeping & Mopping
Note: When using the mop assembly for the first time, the robot will perform
the sweeping and mopping task by default.
1. Start sweeping and mopping
Press the button
on the robot, or use the app to make the robot start from
the base station. Then the robot will plan the optimal cleaning route and
perform the cleaning task based on the created map.
Note:
· The mop pads will be cleaned before the robot starts mopping, please wait
patiently.
· Do not move the base station, the clean water tank, the used water tank, or
the washboard during operation.
2. Return to clean mop pads midway
When mopping, the robot will automatically return to the base station to wash
its mop pads based on the mop pad cleaning frequency specified in the app.
3. Clean the mop pads
After the robot finishes a cleaning task and returns to the base station to
charge, the base station will automatically clean the mop pads.
4. Clean the used water tank
After the robot has completed the task, please clean the used water tank to
avoid any odor.
Sweeping
To use only the sweeping function, select "Sweeping" in the app, and the
robot will automatically lift the mop assembly before sweeping. Or you can
remove the mop assembly and then the robot will automatically switch to the
sweeping mode.
Note: To ensure the robot can easily return to the base station , it is
recommended to make the robot start from the base station and avoid
moving the base station during cleaning.
EN
11
Publicité
