Kärcher MC 250 Implements Mode D'emploi page 47

Travel direction selector switch
1
1. Press the travel direction selector switch to the end po-
sition.
a The intersection function is activated and an indicator
lights up in the display.
2. Press the travel direction selection switch again.
a The intersection function is deactivated and the indi-
cator in the display goes out.
b The brushes turn again, the suction mouth is lowered
and the water supply starts again.
c The cleaning work continues with the previously set
values.
2.5.3 Sound proofing attachment kit (ex-factory
option)
A sound proofing attachment kit is installed at the factory
can be recognized by an additional label 99 dB (A) on the
rear of the waste container.
Label 99dB (A)
1
1. The sound proofing of 99 dB (A) is achieved when the
engine speed is set to 1400 rpm.
2.5.4 Fill the fresh water tank / recycling water tank
Left side panel
1
Filler neck with cover
2
Fresh water tank cap
3
Manual suction hose flap/overflow protection
4
Note
The open flap of the manual suction hose provides over-
flow protection when filling
1. Swing the left side panel outwards.
2. Remove the cover from the filler neck and attach a suit-
able water supply hose.
3. Unscrew the fresh water tank cap.
4. -Open the manual suction hose flap
Filler neck with cover
1
Switchover valve position for filling the recycling water
2
tank
Switchover valve position for filling the fresh water tank
3
5. Select the position of the switchover valve accordingly.
Fill the fresh water tank or recycling water tank.
a Maximum fresh water tank filling quantity: 190 litres
b Maximum recycling water tank filling quantity: 445 li-
tres
6. Fit the cover again after filling.
English 47