Publicité
Les langues disponibles
Les langues disponibles
7. Raise the waste container slightly and fold the safety
supports to the rear and into the storage position.
8. Lower the waste container completely.
9. Depressurise the rear hydraulic system, see chapter
"Hydraulic pressure relief".
Rear hydraulic connections
1
10.Disconnect the hydraulic hoses of the waste container
from the hydraulic connections.
Power supply plug
1
High-pressure cleaner water connection (option)
2
High-pressure cleaner (Option)
3
11.Unplug the power supply plug.
12.Disconnect the reversing camera cable (if present).
13.With optional high-pressure cleaner: Disconnect the
water connection.
14.Pivot the side covers (left and right) outwards.
Figure: Attached locking button with inserted and secured
support
Rear side cover
1
34
Rear support
2
Locking button (4x)
3
Crank
4
15.Caution: Before the supports are pushed in, all 4 lock-
ing buttons (scope of delivery of the "Supports" attach-
ment kit) must be attached to the left front and rear as
well as right front and rear of the waste container, ad-
justed and secured with the lock nuts. See "Installing the
locking buttons" at the end of this chapter .
16.Push in the rear supports (left and right) all the way to
the end stop while pulling out the red retaining head. Re-
lease the locking button to lock. The locking pin engag-
es in the holes in the supports when locking. Check that
the supports are locked securely.
17.Attach and secure the front supports as already de-
scribed for the rear supports.
Note
The front supports are marked and only fit on the corre-
sponding side.
Figure: Variant A with 2 short locking pins
Rear locking pin, short
1
Spring pin
2
Figure: Variant B with long locking pin
Locking pin, long
1
Hexagon bolt
2
18.With variant A: Crank up the rear supports until the
locking pins at the rear can be pulled out.
19.To pull out the spring pin, first open the tailgate of the
waste container. The tailgate is available in 2 different
versions.
a Variant 1: The tailgate can be opened with a square
key.
English
Publicité
