Makita VR001G Manuel D'instruction page 8

4. Pass the adapter plug and plug cord through the
round hole in the battery case.
Fig.9
► 1. Adapter plug 2. Plug cord 3. Battery adapter
5. Close the battery case securely.
6.
Place the rubber sealing grommet back in place.
1
Fig.10
► 1. Rubber sealing grommet 2. Plug cord 3. Battery
case
3
2
1
3
2
Uninstallation
1.
Open the battery case while pressing the buttons
on sides of the battery case.
2. Open the rubber sealing grommet in the battery
case.
Make sure to squeeze the rubber sealing grommet out
of the round hole rim from inside the front cover of the
case.
1
Fig.11
► 1. Rubber sealing grommet 2. Front cover
3.
Pull the adapter plug and plug cord out through
the round hole in the battery case.
4. Slide the battery adapter off from the tool while
pressing the button on front of the battery adapter.
5. Close the battery case securely.
Indicating the remaining battery
capacity
Press the check button on the battery cartridge to indi-
cate the remaining battery capacity. The indicator lamps
light up for a few seconds.
Fig.12
► 1. Indicator lamps 2. Check button
8 ENGLISH
2
1
2