Makita VR001G Manuel D'instruction page 2

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Vibrations per minute
Vibration head diameter
Flexible shaft lengths
Overall length
(with battery case L)
Rated voltage
Net weight
1
* without flexible shaft
2
* with 1.2 m (3.9 ft) flexible shaft
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Recommended cord connected power source
Portable power pack
• The cord connected power source(s) listed above may not be available depending on your region of residence.
• Before using the cord connected power source, read instruction and cautionary markings on them.
SAFETY WARNINGS
General power tool safety warnings
WARNING
Read all safety warnings, instruc-
tions, illustrations and specifications provided with
this power tool. Failure to follow all instructions listed
below may result in electric shock, fire and/or serious
injury.
Normal mode
Power mode
VR001G
-
* Supplied as optional
accessories
ø32 mm (ø1-1/4")
-
* Supplied as optional
accessories
1.2 m - 2.4 m (3.9 ft - 7.9 ft)
296 mm (11-5/8") *
D.C. 36 V - 40 V max
2.1 - 3.4 kg (4.6 - 7.5 lbs) *
BL4020 / BL4025 / BL4040* / BL4050F* / BL4080F*
* : Recommended battery
DC40RA / DC40RB / DC40RC
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
Work area safety
Keep work area clean and well lit. Cluttered or
1.
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
Keep children and bystanders away while operating
3.
a power tool. Distractions can cause you to lose control.
2 ENGLISH
VR003G
12,000 /min
15,500 /min
ø32 mm (ø1-1/4")
1.2 m (3.9 ft)
1
1,509 mm (59-1/2") *
1
4.8 - 6.1 kg (10.6 - 13.5 lbs) *
PDC01 / PDC1200
2
2