Publicité
Use
EN
Before you start
WARNING: Read the instructions before using the appliance.
Switch on the power to the appliance at the mains consumer unit, the appliance is ready for use.
Using your oven
Before first use
• Remove all stickers, surface protection foils and packing materials.
• Remove all accessories and the side racks from the cavity.
• Clean the appliance cavity and all accessories as described in Care and maintenance.
• Turn the oven on, choose Convection mode and set the temperature to 250 °C. Close the door and
cook for 90 minutes to burn off any remaining manufacturing residues. (See the section "Cooking Mode"
below.)
IMPORTANT: Keep the kitchen well ventilated during this first use to help disperse
the odours produced. Keep kitchen doors closed and ensure children and pets are
Program selection
1. Rotate the left control knob "
details.
2. Rotate the right control knob " " to choose the temperature between 50 °C to 250 °C.
3. The oven now switches on automatically and starts heating. The temperature indicator lights up.
4. After use, return both knobs to the "0" position to turn off the oven.
Note:
The temperature indicator lights up from time to time during use to indicate the thermostat is controlling
the set temperature. This does not apply to the oven lamp and defrost functions.
CAUTION: The appliance will not switch off automatically after use.
" to choose the cooking mode you require. See the table below for full
Never leave the appliance unattended during use!
not present.
21
Publicité
