Publicité
Les langues disponibles
Les langues disponibles
Britax Child Safety, Inc.
Replacing the Cover
1. Attach one side of the
upper shell cover at the
forward-facing belt path,
pull the cover over the
back of the shell, and
secure at opposite belt
path.
2. Replace lower shell
cover.
a. Open the
CLICKTIGHT.
b. Tuck one of the
plastic tabs on the
lower shell cover into
the outer side of the
shell between the
forward and rear-
facing belt paths.
c. Tuck the lower shell
cover around the
inner and outer sides
of the shell from the
forward-facing belt
paths to the front of
the child seat.
d. Continue replacing
the lower shell cover
around the seat to the
other forward-facing
belt path and tuck the
second plastic tab
into the shell between
the forward and rear-
facing belt paths.
IMPORTANT:
cover is secured behind red
markers to allow for proper
function of CLICKTIGHT.
e. Thread the harness
adjuster strap through
the front of the lower
shell cover.
36
Ensure shell
2a
2b
2d
2e
Publicité
