Publicité
Les langues disponibles
Les langues disponibles
Britax Child Safety, Inc.
Lap Belt Installation
1. Open the CLICKTIGHT.
a. Press the dimple on
the CLICKTIGHT dial.
b. Rotate dial clockwise
until CLICKTIGHT
releases and lift to
open.
2. Attach the anti-rebound
bar (see page 27).
3. Recline the unoccupied
child seat and place rear-
facing on the vehicle seat
NOTE: Ensure that no
more than 7.5 cm (3 in.)
of the base hangs over
the edge of the vehicle
seat (see page 26).
4. Slide the vehicle belt into
the rear-facing belt slots.
5. Buckle the seat belt.
NOTE: Ensure the
vehicle belt is not twisted
and buckle the seat belt.
6. Push down into
the middle of the
child seating area
with moderate
force (9.1kg/20lbs),
compressing the vehicle
seat while tightening the
vehicle belt.
NOTE: Ensure that the
vehicle belt is locked as
directed by your vehicle
owner's manual.
12
1a
7.5 cm
1b
Publicité
