Publicité
Les langues disponibles
Les langues disponibles
Anti-Rebound Bar
The anti-rebound bar is not intended for use as a carry
handle. Do not use the anti-rebound bar to carry this child
seat.
IMPORTANT:
forward-facing installation.
Installing the Anti-Rebound Bar
1. Open the CLICKTIGHT.
2. Pull back on the shell
cover behind the red
marker and locate the
open end of the structure
tube.
3. Insert one end of the anti-
rebound bar into the tube
as shown, then repeat for
other side.
4. Lift up on the anti-
rebound bar to ensure
both ends are properly
set inside the structure
tubes.
NOTE: Closing the
CLICKTIGHT will
completely secure the
anti-rebound bar.
Removing the Anti-Rebound Bar
1. Open the CLICKTIGHT.
2. Grasp the anti-rebound
bar at both sides and pull
away from the child seat.
WARNING!
The anti-rebound bar MUST be removed for
MARATHON CLICKTIGHT User Guide
Structure
Tube
27
Publicité
