Publicité
Les langues disponibles
Les langues disponibles
Comfort Pillow
The comfort pillow is
designed to provide better fit
and comfort for infants using
this child seat.
NOTE: Remove the
comfort pillow after the
child can sit comfortably
in the child seat without
additional support.
Seat Position
This child seat has 7 recline positions. To adjust the recline
position:
1. Pull the recline handle then
rotate the child seat shell until
the recline indicator ball is in
the correct position for the
specific installation (See Using
the Recline Indicator below).
2. Release the recline handle,
then verify the child seat has
locked into position.
NOTE: Set the seat position BEFORE installing.
Using the Recline Indicator
• Rear Facing Installations - It is important that the child seat
be properly reclined. Use the recline indicator on the child seat
to help achieve an acceptable recline angle for:
‐ infants and children with
no head and neck control
- recline indicator ball in the
light blue section
‐ older children with proper
head and neck control -
recline indicator ball in light
blue or dark blue.
NOTE: If necessary, the proper recline angle can be
achieved by placing a rolled towel or pool noodle in
the vehicle seat bight.
• Forward Facing Installations - Use the recline indicator on the
child seat to help achieve an acceptable recline angle, with the
recline indicator ball in the green section.
This seat must not be used in a position other than
upright for forward-facing lap-shoulder belt and lap belt
installations.
MARATHON CLICKTIGHT User Guide
Toddler
WARNING!
Infant
25
Publicité
