Publicité
Les langues disponibles
Les langues disponibles
Britax Child Safety, Inc.
LUAS Installation
IMPORTANT:
child weighing more than 18 kg (40 lbs).
1. Remove the lower
connectors from the
storage compartment at
the rear of the seat and
pull the strap to full length
toward the child's left
side.
2. Remove the tether
from the tether storage
compartment and retainer
tabs and place it up and
over the child seat back.
3. Place upright forward-
facing on the vehicle seat.
NOTE: Ensure that the
base of the child seat is
flat on the vehicle seat
and no more than 7.5 cm
(3 in.) of the base hangs
over the edge of the
vehicle seat (see page
26).
4. Open the CLICKTIGHT.
a. Press the dimple on
the CLICKTIGHT dial.
b. Rotate dial clockwise
until CLICKTIGHT
releases and lift to
open.
5. Slide the lower connector
strap into the forward-
facing belt slots and
firmly press the lower
connectors over their
adjacent lower anchors.
NOTE: Verify that the
connectors are secure
and thstrap is not
twisted.
6. Pull the end of the lower
connector strap to
remove slack.
16
Do not install forward-facing with LUAS for a
7.5 cm
4a
4b
Publicité
