Publicité
Les langues disponibles
Les langues disponibles
Britax Child Safety, Inc.
Forward-Facing Installation
IMPORTANT:
facing position.
Lap-Shoulder Belt Installation (Preferred Method)
1. Remove the tether
from the tether storage
compartment and retainer
tabs and place it up and
over the child seat back.
2. Place upright forward-
facing on the vehicle seat.
NOTE: Ensure that the
base of the child seat is
flat on the vehicle seat
and no more than 7.5 cm
(3 in.) of the base hangs
over the edge of the
vehicle seat (see page
26).
3. Open the CLICKTIGHT.
a. Press the dimple on
the CLICKTIGHT dial.
b. Rotate dial clockwise
until CLICKTIGHT
releases and lift to
open.
4. Slide both the lap and
shoulder parts of the
vehicle belt into the
forward-facing belt slots.
5. Buckle the seat belt.
NOTE: Ensure the
vehicle belt is not twisted
and buckle the seat belt.
6. Remove slack from the
lap part (a), then the
shoulder part (b) of the
vehicle belt.
14
Do not use the anti-rebound bar in a forward-
7.5 cm
3a
3b
6b
6a
Publicité
