Publicité
Les langues disponibles
Les langues disponibles
Britax Child Safety, Inc.
Rear-Facing Installation
Lap-Shoulder Belt Installation (Preferred Method)
1. Open the CLICKTIGHT.
a. Press the dimple on
the CLICKTIGHT dial.
b. Rotate dial clockwise
until CLICKTIGHT
releases and lift to
open.
2. Attach the anti-rebound
bar (see page 27).
3. Recline the unoccupied
child seat and place rear
facing on the vehicle seat.
NOTE: Ensure that no
more than 7.5 cm (3 in.)
of the base hangs over
the edge of the vehicle
seat (see page 26).
4. Slide both the lap and
shoulder parts of the
vehicle belt into the rear-
facing belt slots.
5. Buckle the seat belt.
NOTE: Ensure the
vehicle belt is not
twisted.
6. Remove slack from the
lap part (a), then the
shoulder part (b) of the
vehicle belt.
8
1a
6b
6a
1b
7.5 cm
Publicité
