Publicité
Les langues disponibles
Les langues disponibles
Britax Child Safety, Inc.
Child Seat Functions
Adjusting the Harness Height
In rear-facing mode, the harness straps should be in the
closest position at or below your child's shoulders. See
page 7.
In forward-facing mode, the harness straps should be in
the closest position at or above your child's shoulders. See
page 7.
1. Loosen the harness.
a. Push harness release
button.
b. Pull both harness
straps forward.
2. Squeeze the harness
height adjuster, slide the
harness into the desired
position and release.
NOTE: Ensure the
harness has locked into
position.
Adjusting the Harness Length
IMPORTANT:
snug harness cannot be achieved with a small infant (approx.
4.5 kg [10 lbs] and under).
Shortening the Harness
1. Open the CLICKTIGHT.
a. Press the dimple on
the CLICKTIGHT dial.
b. Rotate dial clockwise
until CLICKTIGHT
releases and lift to
open.
2. Disconnect the end of
one harness from the
anchor.
22
Adjust the harness to the shortened length if a
1b
1a
1a
1b
Publicité
