Publicité
Les langues disponibles
Les langues disponibles
Britax Child Safety, Inc.
LUAS Installation
IMPORTANT:
weighing more than 15.8 kg (35 lbs).
1. Open the CLICKTIGHT.
a. Press the dimple on
the CLICKTIGHT dial.
b. Rotate dial clockwise
until CLICKTIGHT
releases and lift to
open.
2. Attach the anti-rebound
bar (see page 27).
3. Recline the unoccupied
child seat and place rear-
facing on the vehicle seat
NOTE: Ensure that no
more than 7.5 cm (3 in.)
of the base hangs over
the edge of the vehicle
seat (see page 26).
4. Remove the lower
connectors from the
storage compartment at
the rear of the seat and
pull the strap to full length
toward the child's left
side.
5. Slide the lower connector
strap into the rear-facing
belt slots and firmly press
the lower connectors
over their adjacent lower
anchors.
NOTE: Verify that the
connectors are secure
and the strap is not
twisted.
10
Do not install rear-facing with LUAS for a child
1a
7.5 cm
1b
Publicité
