Publicité
Les langues disponibles
Les langues disponibles
Britax Child Safety, Inc.
Maintenance
IMPORTANT:
components to make sure they are in good condition and
good working order.
Cover
Removing the Cover
Never remove the buckle tongues from the harness.
They cannot be reattached after removal. If reassembled
incorrectly, the child seat may not perform as intended.
1. Loosen and unbuckle the
harness.
a. Push harness release
button.
b. Pull both harness
straps forward.
c. Unbuckle the
harness.
2. Open the chest clip.
a. Press tabs.
b. Pull apart.
3. Remove the comfort
pillow and comfort pads
(if necessary).
4. Remove the belly pad
and buckle.
a. Open the
CLICKTIGHT and
remove the two
elastic loops on
the bottom of the
CLICKTIGHT.
b. Lift the front of the
seat cover and pull
over the CLICKTIGHT
bezel to access
the buckle strap
connection.
c. Remove the harness
buckle by turning
the buckle strap
sideways and routing
the retainer out of
the front buckle slot
in the child seat (see
page 38).
34
Before each use, check this car seat and its
WARNING!
1b
1a
2a
4b
4c
2b
4a
Publicité
