Sun Microsystems SunPCi 1.1 Guide D'installation page 18

4. Click on Choose File and browse the CD until you select README.htm. Open the
file in your Web browser.
The README.htm file is displayed in your browser.
5. Use the Next, Previous, and Contents buttons to navigate through the pages of the
SunPCi User's Guide.
Installing the SunPCi Software
If you already have SunPCi 1.0 software installed, you will need to remove the older
package and any patches that you may have installed. The procedure involves the
following steps:
1. Determine the version of Solaris installed on your system (if you do not already
know it).
2. Find out the version of SunPCi software installed on your system.
3. Remove the patch (if you have any installed). The command you use to remove
the patch depends on your Solaris version.
4. Remove the SunPCi 1.0 package.
5. Install the SunPCi 1.1 package.
If you are installing SunPCi software for the first time, just install the SunPCi 1.1
package. Proceed to "Installing the SunPCi 1.1 Package" on page en-18.
Finding Out Your SunPCi Software Version
If you are installing SunPCi software for the first time, skip this section and proceed
directly to "Installing the SunPCi 1.1 Package" on page en-18.
If you are not sure which version of SunPCi you are running, type the following
command:
% pkginfo -l SUNWspci
en-14 SunPCi 1.1 Installation Guide • September 1999