Stihl MSA 160 C Notice D'emploi page 57

22 Bar and Chain Combinations
Information on compliance with Vibration Direc‐
tive 2002/44/EC is available at www.stihl.com/
vib.
21.6 REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorisation and
Restriction of Chemical substances.
22 Bar and Chain Combinations
22.1 STIHL MSA 160 C, MSA 200 C Chainsaws
Pitch Drive link
gauge/groove
width
1/4" P 1.1 mm
The cutting length of a guide bar depends on the chainsaw and the saw chain being used. Actual cut‐
ting length may be less than the specified length
23 Spare Parts and Accesso‐
ries
23.1 Spare parts and accessories
These symbols indicate original STIHL
spare parts and original STIHL acces‐
sories.
STIHL recommends the use of original STIHL
spare parts and accessories.
Despite ongoing market observation, STIHL is
unable to judge the reliability, safety and suitabil‐
ity of other manufacturers' spare parts and
accessories; accordingly, STIHL cannot warrant
for the use of those parts.
Original STIHL spare parts and original STIHL
accessories are available from STIHL dealers.
24 Disposal
24.1 Disposing of Chainsaw and
Battery
Contact the local authorities or your STIHL
dealer for information on disposal.
Improper disposal can be harmful to health and
pollute the environment.
► Take STIHL products including packaging to a
suitable collection point for recycling in accord‐
ance with local regulations.
► Do not dispose with domestic waste.
0458-701-9621-B
Length Guide bar
25 cm
30 cm Rollomatic E Mini
35 cm
For information on compliance with the REACH
regulation see www.stihl.com/reach.
Nose spro‐ Number of
cket teeth drive links
8
25 EC Declaration of Con‐
formity
25.1 STIHL MSA 160 C, MSA 200 C
Chainsaws
ANDREAS STIHL AG & Co. KG
Badstraße 115
D-71336 Waiblingen
Germany
declare under our sole responsibility that
– Category: Cordless chainsaw
– Manufacturer's brand: STIHL
– Model: MSA 160 C, Serial identification: 1250
– Model: MSA 200 C, Serial identification: 1251
conforms to the specifications of Directives
2011/65/EU, 2006/42/EC, 2014/30/EU and
2000/14/EC and has been developed and built in
compliance with the versions of the following
standards valid at the production date:
EN 55014‑1, EN 55014‑2, EN 60745‑1 and
EN 60745‑2‑13.
The EC type examination test was carried out
pursuant to Directive 2006/42/EC, Art. 12.3(b) at:
VDE Prüf- u. Zertifizierungsinstitut (NB 0366),
Merianstraße 28, 63069 Offenbach, Germany
– Certification number 40040600 MSR
The measured and guaranteed equivalent sound
power level has been determined in accordance
with Directive 2000/14/EC, Annex V.
MSA 160 C
– Measured sound power level: 97 dB(A)
English
Saw chain
56
71 PM3 (Type
64
3670)
72
57