Agilent Technologies Turbo-V 1000 HT Notice De Mode D'emploi page 291

17
Technical Information
Use
Select the run-up time according to the chamber volume and/or
operating cycle feature (see the preceding cycle diagram) by pressing
the CYCLE NUMBER push-button to select the desired number.
Figure 35
Press the PUMP CURRENT push-button to enter the data.
Figure 36
The run up time is factory-set to:
00h 08m 00s.
Turbo-V 1000HT Controller User Manual / 87-900-894-01 (G) 291/310