Publicité
Les langues disponibles
Les langues disponibles
1.
Turn the CH rotary knob (4) or use the UP/DN keys (19) on the microphone
to
select
the DW SET menu.
2.
Press the PUSH key (4). The channel flashes in the display.
3.
Turn CH knob (4) or use the UP/DN keys (19) on the microphone to select
the channel.
4.
Press MODE (5) to
select
AM, FM, USB and LSB mode.
5.
Press PUSH key (4) again to
confirm.
again at point 1 to
set
another function or b) Press the PTT switch (18) to
exit
MENU
6.
If no key is pressed, the unit
exits
from the display.
17) SPAN SETTING
When the function is active, the frequency can be adjusted continuously.
Pressing the PUSH knob (4) displays a bar under the first or second decimal
of the frequency. The CH rotary knob (4) no longer acts on the channel but
executes a 100 kHz (first decimal place) or 10 kHz (decimal second) jump
frequency.
Long Press PUSH key (4) to
enter
1.
Turn the CH rotary knob (4) or use UP/DN keys (19) on the microphone to
select
the SPAN SETTING menu.
2.
Press PUSH key (4) to
validate.
3.
Turn the CH rotary knob (4) or use the UP/DN keys (19) on the microphone
to
activate
( on) /
deactivate
4.
Short press the PUSH key (4) to validate. a) Return to the point 1 to set another
menu or b) Short press the PTT key (18) to
disappears from the display.
5.
exits
If no key is pressed, the unit
from the display.
Default SPAN is oF.
18) CALL TONE FREQUENCY
Set
the FREQUENCY of the CALL tone.
Long Press PUSH key (4) to
enter
1.
Turn the CH rotary knob (4) or use UP/DN keys (19) on the microphone to
select
the CALL SETTING menu.
2.
Press PUSH key (4) to
validate.
3.
Turn the CH rotary knob (4) or use the UP/DN keys (19) on the microphone
to adjust the frequency.
Frequency range: 300 Hz ~ 3000 Hz. Step size: 10 Hz. Default value: 1050 Hz.
Press the PUSH key (4) to modify the step.
The channel stops flashing. a) Start
the MENU after 10 seconds.
disappears
the MENU.
is displayed.
The current value blinks on the display.
( of) the function.
validate
and
exit
the MENU.
MENU after 10 seconds.
disappears
the MENU.
is displayed.
The current value blinks on the display.
4.
Short press the PUSH key (4) to validate. a) Return to the point 1 to set another
menu or b) Short press the PTT key (18) to
disappears from the display.
5.
If no key is pressed, the unit
from the display.
19) VOLUME ACCESSORY
This function allows you to control the volume of the unit and an accessory
plugged on the 6-pin plug (accessory available soon).
Long Press PUSH key (4) to
1.
Turn the CH rotary knob (4) or use UP/DN keys (19) on the microphone to
select
the
menu.
2.
Press PUSH key (4) to
validate.
3.
Turn the CH rotary knob (4) or use the UP/DN keys (19) on the microphone
select
to
00, 01 or 02.
4.
Short press the PUSH key (4) to validate. a) Return to the point 1 to set another
menu or b) Short press the PTT key (19) to
disappears from the display.
5.
If no key is pressed, the unit
from the display.
00 - the vol knob (1) affects the internal speaker volume.
01 - the vol knob (1) affects the accessory volume
02 - the vol knob (1) affects both the internal speaker and accessory volume.
Default accessory volume is 00.
20) SWR PROTECTION SETTING
Set
the SWR LEVEL PROTECTION.
Long Press PUSH key (4) to
1.
Turn the CH rotary knob (4) or use UP/DN keys (19) on the microphone to
select
the SWR PROTECTION menu.
2.
Press PUSH key (4) to
validate.
3.
Turn the CH rotary knob (4) or use the UP/DN keys (19) on the microphone
to
select
2. 0 to 20. 0 .
4.
Short press the PUSH key (4) to validate. a) Return to the point 1 to set another
menu or b) Short press the PTT key (18) to
disappears from the display.
5.
If no key is pressed, the unit
from the display.
Default value is 3. 0
16
validate
and
exit
exits
MENU after 10 seconds.
enter
the MENU.
is displayed.
The current value blinks on the display.
validate
and
exit
exits
MENU after 10 seconds.
enter
the MENU.
is displayed.
The current value blinks on the display.
validate
exit
and
exits
MENU after 10 seconds.
the MENU.
disappears
the MENU.
disappears
the MENU.
disappears
Publicité
