PRESIDENT GEORGE FCC Manuel D'utilisation page 10

of the transceiver (E) disables
Short press the VOX key (11) in order to
appears on the display. Short press again the VOX key (11) to
function. "VOX" disappears.
NOISE GATE
(combination 14 + 11)
- Short press the F key (14). appears on the display,
Short press the VOX key (11) to
-
GATE. " " is displayed when the function is active.
Noise Gate: Prevents amplification of background noise. This results in
optimized signal levels.
VOX SETTING
(long press)
1. Long press the VOX key (11) to
current setting and its value appear on the display. Three parameters allow
to adjtust the VOX: Sensitivity
time .
2a. Turn the CH rotary knob (4) or use the UP/DN keys (19) on the microphone
modify the current parameter then, press the F key (14) to
to
parameter or....
2b. Press first the F key (14) to select
CH rotary knob (4) or use the UP/DN keys (19) on the microphone to
the current parameter.
3. When all adjustments are done, press PTT switch (18) to
KEY BEEP function is activated, a long beep sounds to
of the operation (consul the KEY BEEP menu page 12).
4. If no key is pressed for 10 seconds, the unit automatically
VOX SETTING without save.
- Sensitivity : allows the adjustment of the microphone (original one
or optional vox) for an optimum transmission quality. Adjustable level from1
(high level) to 9 (low level). Default value: 5.
- Anti-Vox : allows disabling the transmission generated by the sur-
rounding noise. The level is adjustable. AF (according the squelch level)
and from 0 (without anti-vox) to 9 (low level). Default value: AF.
Delay time
- : allows avoiding the sudden cut of the transmission by
adding a delay at the end of speaking. The level is adjustable from 1 (short
delay) to 9 (long delay). Default value: 1.
VOX SETTING doesn't activate the VOX function.
the original microphone.
activate the VOX function. "VOX"
disable
activate deactivate (OF) the NOISE
(On) or
enter the VOX SETTING. "VOX" blinks, the
/ Anti-vox level / Vox delay
select
another the parameter and then turn the
store and exit. If the
confirm the success
exits the function
12) NRC
NRC
(short press)
the
This switchable filter can be used to improve reception and transmission
modes..
- Press the NRC key (12) to activate/deactivate the NRC in this order:
1- NRC RX LED is green
2- NRC TX LED is red
3- NRC RX + TX LED is orange
4- NRC Off LED is off.
See NRC SET menu page 50.
13) TALKBACK
(short press)
This function allows you to
or external speaker connected to the EXT.SP jack (C).
Short press the TB key (13) to
next
When the function is active, the LED is lit.
14) F ~ LOCK
modify
F
(short press)
set/validate
Allows to
This key pressed alone don't have any use.
LOCK
(long press)
Long press F (14) keys to
the function is active, "
15) CB/WX (WEATHER CHANNEL) ~ ALERT
CB/WX (WEATHER CHANNEL)
CB functions are not allowed in
and KEY BEEP function is activated, the radio sounds error tone.
Press the CB/WX key (15) to
WX
mode is activated, "WX" appears on the display.
WX
The mode allows to hear weather information. When the mode is
activated, use the CH rotary knob (4) on the unit or the UP/DN keys on the
microphone to move
10
hear your own modulation in the optional internal
activate /deactivate the TALKBACK function.
functions (see for example § DUAL WATCH page 8).
activate/deactivate the KEY LOCK function. When
" appears on the display.
(short press)
WX
mode. If user presses a not allowed key
alternate CB
between and
through the 7 weather channels to find the active
WX
mode. When