1. Turn the CH rotary knob (4) or use UP/DN keys (19) on the microphone to
select
the
menu.
2.
Press PUSH key (4) to
validate.
3.
Turn the CH rotary knob (4) or use UP/DN keys (19) on the microphone to
modify
the color of the display.
4.
Short press PUSH key (4) to validate. a) Return to the point 1 to set another
menu or b) Short press the PTT key (18) to
disappears from the display.
5.
exits
If no key is pressed, the unit
from the display.
Default COLOR is:
(orange).
2) DIMMER
DIMMER function allows
adjusting
from 0 to 9.
Long Press PUSH key (4) to
enter
1.
Turn the CH rotary knob (4) or use UP/DN keys (19) on the microphone to
select
the
menu.
2.
Press PUSH key (4) to
validate.
3.
Turn the CH rotary knob (4) or use the UP/DN keys (19) on the microphone
to
change
the value of the dimmer.
4.
Short press PUSH key (4) to validate. a) Return to the point 1 to set another
menu or b) Short press the PTT key (18) to
disappears from the display.
5.
If no key is pressed, the unit
exits
from the display.
Dimmer default value is : 5.
3) TONE
This function allows to
change
Long Press PUSH key (4) to
enter
1.
Turn the CH rotary knob (4) or use UP/DN keys (19) on the microphone to
select
the
menu.
2.
Press PUSH key (4) to
validate.
3.
Turn the CH rotary knob (4) or use the UP/DN keys (19) on the microphone
to
change
the value of the tone.
4.
Short press PUSH key (4) to validate. a) Return to the point 1 to set another
menu or b) Short press the PTT key (18) to
The current color blinks on the display.
validate
exit
the MENU.
and
MENU after 10 seconds.
disappears
the brightness of the lighting. 10 steps
the MENU.
is displayed.
The current value blinks on the display.
validate
and
exit
the MENU.
MENU after 10 seconds.
disappears
RX
the
TONE. 11 steps from -5 to +5
the MENU.
is displayed.
The current value blinks on the display.
validate
and
exit
the MENU.
disappears from the display.
5.
If no key is pressed, the unit
from the display.
Tone default value is : 0
4) KEY BEEP
When the function is activated, a beep
changing the channel etc. "BP" appears on the display when the function
is active.
Long Press PUSH key (4) to
1.
Turn the CH rotary knob (4) or use UP/DN keys (19) on the microphone to
select
the
menu.
2.
Press PUSH key (4) to
validate.
3.
Turn the CH rotary knob (4) or use the UP/DN keys (19) on the microphone
activate
( on) /
deactivate
to
4.
Short press PUSH key (4) to validate. a) Return to the point 1 to set another
menu or b) Short press the PTT key (18) to
disappears from the display.
5.
If no key is pressed, the unit
from the display.
Default KEY BEEP is On.
5) ROGER BEEP
When the function is active, the icon
The Roger Beep
sounds
when the PTT switch (12) on the microphone is re-
leased in order to let your correspondent speak. Historically as transceiver
is a "simplex" communication mode, it is not possible to speak and to listen
at the same time (as it is the case with a telephone). Once someone had
finished talking, he said "Roger" in order to prevent his correspondent that
it was his turn to talk. The word "Roger" has been replaced by a significant
beep. There comes "Roger beep" from.
Long Press PUSH key (4) to
1.
Turn the CH rotary knob (4) or use UP/DN keys (19) on the microphone to
select
the ROGER BEEP menu.
2.
Press PUSH key (4) to
validate.
3.
Turn the CH rotary knob (4) or use the UP/DN keys (19) on the microphone
( 1 to 6*) /
activate
deactivate
to
4.
Short press PUSH key (4) to validate. a) Return to the point 1 to set another
menu or b) Short press the PTT key (18) to
disappears from the display.
5.
If no key is pressed, the unit
from the display.
12
exits
MENU after 10 seconds.
sounds
when a key is pressed, by
enter
the MENU.
is displayed.
The current value blinks on the display.
( of) the function.
validate
and
exit
exits
MENU after 10 seconds.
appears on the display.
enter
the MENU.
is displayed.
The current value blinks on the display.
(OF) the function.
validate
and
exit
exits
MENU after 10 seconds.
disappears
the MENU.
disappears
the MENU.
disappears